Cooling machine also can be used as the fertilizer production line, which can cool the fertilizer with the heat to one ordinary temperature, and the mutual coordination of cooling machine and dryer can greatly enhance the speed of being cool, which can decrease the labor strength and improve the output. But do you know How does Rotary Drum Cooler Machine Finish Work?
The working principle of Rotary Drum Cooler is in the following:
Dry wet materials by belt conveyor or bucket elevator to the hopper, and then through the hopper feeder through the feeding tube into the feed end. The feed pipe slope should be greater than the natural inclination of materials, so that the material smoothly into the cooler. Cylinder of Rotary Drum Cooler is a cooler with horizontal tilt slightly into the rotary cylinder. Material from high end to join, heating medium by the low end of the flow, and material into a counter-current contact, there is also a heating medium with materials and flow into the cylinder. With the rotation of the cylinder material by gravity to run to the bottom on the lower side. Wet materials in the process of cylinder body move forward, directly or indirectly obtained the heating medium to hot, so hot material has cooled, and then by the belt conveyor or screw conveyor at the discharge end. Inside the cylinder wall with copy board, its role is to put the material copy up and again, the contact surface is increased and the air flow of material, in order to improve the cooling rate and promote the material to move forward. The cooling machine body generally divided into the cold air, etc. After heating medium by the cooler, generally need to cyclone with materials in the gas trap. For further reducing exhaust dust content, but also through the bag filter or wet dust collector before discharge.
In addition, they are professional cone crusher manufactures and cement making production line suppliers, and stone crusher plant for sale, etc,. If you have any other question or have an interest on our product ,you can write to us: sales@hxjq.com
lime kiln: http://www.china-sand-maker.com/machine/p66.html
The working principle of Rotary Drum Cooler is in the following:
Dry wet materials by belt conveyor or bucket elevator to the hopper, and then through the hopper feeder through the feeding tube into the feed end. The feed pipe slope should be greater than the natural inclination of materials, so that the material smoothly into the cooler. Cylinder of Rotary Drum Cooler is a cooler with horizontal tilt slightly into the rotary cylinder. Material from high end to join, heating medium by the low end of the flow, and material into a counter-current contact, there is also a heating medium with materials and flow into the cylinder. With the rotation of the cylinder material by gravity to run to the bottom on the lower side. Wet materials in the process of cylinder body move forward, directly or indirectly obtained the heating medium to hot, so hot material has cooled, and then by the belt conveyor or screw conveyor at the discharge end. Inside the cylinder wall with copy board, its role is to put the material copy up and again, the contact surface is increased and the air flow of material, in order to improve the cooling rate and promote the material to move forward. The cooling machine body generally divided into the cold air, etc. After heating medium by the cooler, generally need to cyclone with materials in the gas trap. For further reducing exhaust dust content, but also through the bag filter or wet dust collector before discharge.
In addition, they are professional cone crusher manufactures and cement making production line suppliers, and stone crusher plant for sale, etc,. If you have any other question or have an interest on our product ,you can write to us: sales@hxjq.com
lime kiln: http://www.china-sand-maker.com/machine/p66.html